Archive

Below are a few selected examples of some of the guitars that I have made over the last 9 years.  More will be added in the fullness of time!

Classical – Ovangkol B&S/Engelmann Spruce Top

December 2023

 

  • 650 mm scale length
  • Full length – 990mm
  • Body length – 488mm
  • Upper bout – 269mm
  • Waist – 231mm
  • Lower bout – 365mm
  • Side at foot – 94mm
  • Side at waist – 93mm
  • Side at heel – 85mm
  • Back and sides – Ovangkol
  • Top – Engelmann Spruce
  • Fingerboard – East Indian Rosewood with Abalone 2mm side dots at 5th and 7th frets
  • Neck thickness at 1st fret – 21.3mm
  • Neck thickness at 9th fret – 25.3mm
  • Neck – Spanish Cedar
  • 12 hole Bridge – East Indian Rosewood
  • Headplate – East Indian Rosewood
  • Backplate – Ovangkol
  • Binding, purfling and backstrip – Ovangkol binding with bloodwood purfling
  • Rosette – One of a kind rosette design using flame maple, rosewood, padauk, coconut.
  • Tuning – Ebony friction pegs (Viola)
  • Saddle and Nut – Unbleached bone
  • String span at nut – 43.5mm
  • Fingerboard width at body (12th fret) – 63mm
  • String span at saddle – 60mm
  • Evo gold frets
  • French polish throughout
This content is blocked because it would connect to YouTube.
This content is blocked because it would connect to YouTube.
Classical – Ovangkol B&S/Engelmann Spruce Top

December 2021

 

  • 650 mm scale length
  • Full length – 992mm
  • Body length – 488mm
  • Upper bout – 274mm
  • Waist – 234mm
  • Lower bout – 364mm
  • Side at foot – 92mm
  • Side at waist – 92mm
  • Side at heel – 84mm
  • Back and sides – Ovangkol
  • Top – Engelmann Spruce
  • Fingerboard – Macassar Ebony
  • Neck thickness at 1st fret – 22
  • Neck thickness at 9th fret – 26
  • Neck – Spanish Cedar
  • 12 hole Bridge – ขี้เหล็ก – Siamese Cassia
  • Headplate – ขี้เหล็ก – Siamese Cassia
  • Binding, purfling and backstrip  – Ovangkol, cherry and bloodwood
  • Rosette – One of a kind rosette design using flame maple, rosewood, padauk, coconut.
  • Tuning – Schertler TBR (with low friction bearings) Tuning machines w/ black Ebony knobs and black rollers .
  • Saddle and Nut – Unbleached bone
  • String span at nut – 45mm
  • Fingerboard width at body (12th fret) – 62mm
  • String span at saddle – 60mm
  • Evo gold frets
  • French polish throughout
This content is blocked because it would connect to YouTube.
Flamenca Blanca – Canadian Cypress B&S/Englemann Spruce Top

June 2019

  • 650 mm scale length
  • Full length – 990mm
  • Body length – 484mm
  • Upper bout – 273mm
  • Waist – 232mm
  • Lower bout– 365mm
  • Sides – 91mm to 87mm
  • Neck thickness at 1st fret – 23.5
  • Neck thickness at 9th fret – 25.5
  • Back and sides – Canadian Cypress
  • Top – Engelmann Spruce
  • Fingerboard – Macassar Ebony
  • Neck – Canadian Cypress
  • 12 hole Bridge – Bocote
  • Headplate – Bocote
  • Binding and backstrip  – Maple with bwb purfling
  • Tuning – Ebony Friction Pegs 
  • Saddle and Nut – Unbleached bone
  • 52mm fingerboard width at nut
  • 62mm fingerboard width at body
  • 60mm string span at saddle
  • Evo gold frets
  • French polish throughout
  • Clear flamenco golpe (tap) plate

This content is blocked because it would connect to YouTube.
This content is blocked because it would connect to YouTube.
IRW B&S/Engelmann Top

 

  • 650 mm scale length
  • Full length – 993mm
  • Back body length – 489mm
  • Upper bout – 278mm
  • Waist – 233mm
  • Lower bout- 366mm
  • Side at foot – 98mm
  • Side at waist– 91mm
  • Side at heel – 86mm
  • Neck thickness at 1st fret – 22.4mm
  • Neck thickness at 9th fret – 25.3mm 
  • Back and sides – Indian Rosewood
  • Top – Englemann Spruce
  • Fingerboard – Macassar Ebony
  • Neck – Spanish cedar/Cedra
  • 12 hole Bridge – Bocote
  • Headplate – Indian Rosewood
  • Binding – Indian Rosewood from the same piece as the sides
  • Purfling – Indian Rosewood and flame maple
  • Tuning – Sloan bronze tuning machines
  • Saddle and Nut – Unbleached bone
  • 45mm string span at nut
  • 60 mm string span at saddle
  • Evo gold frets
  • Sound port in the upper bout with removable cover secured by magnets
  • Armrest permanently attached and made from Macassar ebony, oiled and waxed finish
  • Crystalac gloss finish throughout, applied by brush
  • Glues Hot hide glue used for bracing and bindings. LMI yellow instrument glue for the rest
Flamenca Blanca – Canadian Cypress B&S & Top

April 2019

 

  • 650 mm scale length
  • Full length – 990mm
  • Body length – 486mm
  • Upper bout – 278mm
  • Waist – 232mm
  • Lower bout- 365mm
  • Sides – 90mm to 84mm
  • Back and sides – Canadian Cypress AA (aka Alaskan Yellow Cedar)
  • Top – Canadian Cypress AAA
  • Fingerboard – Macassar Ebony
  • Neck – Canadian Cypress
  • 12 hole Bridge – Bocote
  • Headplate – African Ebony
  • Binding and backstrip  – Rocklite Ebano
  • Tuning – Ebony Friction Pegs – Can be upgraded to geared pegs for an additional ~ $200
  • Saddle and Nut – Unbleached bone
  • 52mm fingerboard width at nut
  • 62mm fingerboard width at body
  • 60mm string span at saddle
  • Evo gold frets
  • French polish throughout,
  • Clear flamenco
  • golpe (tap) plate
This content is blocked because it would connect to YouTube.
Canadian Cypress B&S/Engelmann Spruce Top Blanca

March 2019

  • 650 mm scale length
  • Full length – 985mm
  • Body length – 481mm
  • Upper bout – 275mm
  • Waist – 233mm
  • Lower bout– 366mm
  • Sides – 94mm to 87mm
  • Back and sides – Canadian Cypress AA
  • Top – Engelmann Spruce AA
  • Fingerboard – Macassar Ebony
  • Neck – Spanish Cedar
    12 hole Bridge – Bloodwood
  • Headplate – Bloodwood
  • Binding, backstrip and purfling – Bloodwood, maple, cherry
  • Tuning – Wittner geared tuning pegs
  • Saddle and Nut – Unbleached bone
  • 52mm fingerboard width at nut
  • 62mm fingerboard width at body
    60mm string span at saddle
  • Nickel silver frets
  • French polish throughout
  • Clear flamenco golpe (tap) plate
Red Mountain Cedar/Engelmann Spruce Flamenco 

March 2018

  • 650 mm scale length
  • Back and sides – Red Mountain Cedar
  • Top – Engelmann Spruce
  • Fingerboard – Maccassar Ebony
  • Neck – Port Orford Cedar
  • 12 hole Bridge and Headplate – Bloodwood\
  • Binding, backstrip and purfling – Bloodwood and Maple
  • Tuning – Ebony Friction Pegs (set at a slight angle off 90º downwards)
  • Saddle and Nut – Unbleached bone\
  • 52mm fingerboard width at nut
  • 60mm fingerboard width at body
  • French polish throughout 
  • Clear flamenco golpe (tap) plate.
  • Based on a 1934 Santos Hernandez pattern. Headplate pattern my own design
  • Hot hide glue used on all bracing inside, LMI yellow instrument glue for most other glue joins.
  • Engelmann spruce bracing used for top and back.
Red Mountain Cedar/Englemann Spruce Blanca

December 2017

  • 650 mm scale length
  • Back and sides – Red Mountain Cedar
  • Top – Englemann Spruce AA
  • Fingerboard – Macassar Ebony
  • Neck – Port Orford Cedar
  • Neck thickness at the 1st fret – 23.3mm
  • Neck thickness at the 9th fret – 26mm
  • 12 hole Bridge and Headplate – Mai Rak (literally ‘Wood Love’)
  • Binding, backstrip and purfling – Bloodwood and Maple
  • Full length – 985mm
  • Body length – 486mm
  • Upper bout – 268mm
  • Waist – 230mm
  • Lower bout– 360mm
  • Sides – 94mm to 85mm
  • Neck thickness at 1st fret – 23.5
  • Neck thickness at 9th fret – 26
  • 52mm fingerboard width at nut
  • 60mm fingerboard width at body
  • 57mm string span at saddle
  • Tuning – Ebony Friction Pegs
  • Saddle and Nut – Unbleached bone
  • French polish throughout,
  • Clear flamenco golpe (tap) plate.
  • Based on a 1934 Santos Hernandez pattern. Headplate pattern my own design
  • Hot hide glue used on all bracing inside, LMI yellow instrument glue for most other glue joints
  • Englemann spruce bracing used for the top and cedar bracing for the back. This the first flamenco guitar that I made. The beginning of my guitar making.
  • Notably, the bridge and the headplate are made using Mai Rak, a very rare wood in this part of the world., or any part of the world for that matter. Dear friend and amazing local wood expert Pi Ad gave me a small piece of it when I first moved into the house here in Mae Kampong and he said that it will probably be the only piece of Mai Rak I will ever see. Pi Ad and his wife Kung are my dear friends here, family really, and own the house that I am so happy to be ensconced in.
wpbanner